Not only does VISOR help reduce the amount of fog build up, it also makes it easier to help clear any heavy condensation fog that remains on the surface.

VISOR can be applied to all exterior and interior glass, windows and mirrors. It can also be used in industrial/commercial vehicles and machinery. Can also be used for domestic cleaning operations such as; bathroom and kitchen tiles, mirrors, worktops and floors.

Directions For Use:

1. Apply VISOR directly onto the surface (do not over apply).
2. After suitable contact time (30 – 60 seconds) wipe the product in straight lines with a clean microfibre cloth. (We recommend using GLACIER Glass Cleaning towel)
3. Buff the product with a separate microfibre cloth (or flip your cloth to the dry side).

MOLECULAR TIP: Apply VISOR directly to your microfibre cloth to avoid overspray. Leave the surface in a contaminant free space for 2 hours for best results.

If you would like products for your own brand, check out our white label company; Powerclean Chemicals Ltd.

The post VISOR appeared first on Molecular UK.

Use on exterior tyres, rubber and plastics or on interior plastics and rubber when diluted.

DIRECTIONS FOR USE:

EXTERIOR USE (Apply neat for sheen finish / or dilute 1:1 for a satin finish):

1. Apply preferred solution to the area via trigger spray, cloth or brush.
2. Spread PLUTO evenly across the surface until whole area is covered.
3. Leave to dry or gently buff with a clean microfibre cloth.
4. Wipe away any excess spillages (on wheels, paint etc.) with a clean microfibre cloth.

INTERIOR USE (Dilute 1:2 for sheen finish / or 1:4 for a satin finish):

1. Apply preferred solution to the area via trigger spray, cloth or brush.
2. Spread evenly across the surface.
3. Leave to dry or gently buff with a clean microfibre cloth.
4. Wipe away any excess spillages (on wheels, paint etc.) with a clean microfibre cloth.

The post PLUTO appeared first on Molecular UK.

For best results use the 2 bucket method, one with the solution in, another of just water to wash any excess dirt from your wash mitt in stages during the application. Use grit guards if you have them.

DIRECTIONS FOR USE:

1. Add a squirt (roughly 1-4 caps) of Auto Shine into a bucket of water, use a grit guard if you have one.
2. Submerge your wash mitt or brush in the solution then apply to the vehicle bodywork.
3. Wipe the vehicle top to bottom with your wash mitt. If you are using the recommended 2 bucket method, frequently rinse your wash mitt in the second bucket of water.
4. Once your vehicle has been fully lathered, wash off with a pressure washer or hose then dry.

The post AUTO SHINE appeared first on Molecular UK.

Not only does Hydro Seal add a protective coating to un-coated vehicles, it also helps maintain and improve existing coatings. These include ceramic and graphene coatings, waxes, polishes and other sealants. Suitable for domestic, commercial and professional valet work.

KEY BENEFITS:

Easy to use via snow foam cannon

Can also be used via low pressure spray

Helps maintain gloss

Impressive hydrophobic properties

Assists with drying the vehicle

Maintains and boosts current coatings, waxes, polishes and sealants

Spray on, wash off formulation

DIRECTIONS FOR USE:

Dilute 1:4 for first time coating (no current protection)

Dilute 1:9 for maintenance washes (maintain current protection)

Always shake well before use

1. Ensure vehicle has been fully cleaned and is wet.
2. Apply preferred solution to the vehicle, avoid contact with glass (windscreen and windows) if you can.
3. Leave for no longer than 2 minutes.
4. Wash off with clean high pressure water

If you would like products for your own brand, check out our white label company: Powerclean Chemicals Ltd

The post HYDRO SEAL appeared first on Molecular UK.

This brilliant ceramic detailer also contains the same brilliant gloss enhancers found in our SPARKLE Detailing Spray. This ensures your vehicle gets that outstanding high gloss, showroom shine finish on top of the added protection.

Another benefit of Synthesis is its multiple applications. It can be applied to a dry vehicle by spraying a few light mists per panel, wiped in and buffed to a shine. It can also be applied to a wet vehicle as a drying or rinse aid. To use as a drying aid simply clean and wet the vehicle, apply a light mist to a panel and dry with a drying towel. To use as a rinse aid simply clean and wet the vehicle, spray onto the surface and rinse off. Suitable for professional level valet and detailing work, or general commercial work.

KEY BENEFITS:

Multi application

Use on dry or wet vehicles

Improves water beading

Gives added protection

Boosts durability of existing coatings, waxes, polishes and other sealants

Contains active Si02 ingredient

Enhances gloss

Use on paint, plastics, glass, rubber, wheels and metals

Use as a rinse aid

DIRECTIONS FOR USE:

DRY APPLICATION:

1. Shake well before use – ensure vehicle has been fully cleaned.
2. Apply a small amount of SYNTHESIS onto a small section or body panel at a time. Do not allow to dry.
3. Wipe the applied surface with a clean microfibre cloth.
4. Buff with a separate clean microfibre cloth.
5. Repeat steps 2-4 until the whole vehicle has been done.

WET APPLICATION – RINSE AID:

1. Ensure vehicle is wet and fully cleaned.
2. Apply SYNTHESIS to the wet surface.
3. Wash off then dry.

WET APPLICATION – DRYING AID:

1. Ensure vehicle is wet and fully cleaned.
2. Apply a light mist of SYNTHESIS to 1 panel.
3. Dry panel with a clean drying towel.
4. Repeat steps 2-3 until vehicle is completed.

The post SYNTHESIS appeared first on Molecular UK.

For best results use the 2 bucket method, one with the solution in, another of just water to wash any excess dirt from your wash mitt in stages during the application. Use grit guards if you have them.

DIRECTIONS FOR USE:

1. Add a squirt (roughly 2-5 caps) of Tractor Shampoo into a bucket of water, use a grit guard if you have one.
2. Dunk your wash mitt/brush in the solution then apply to the vehicle bodywork.
3. Wipe the vehicle top to bottom with your wash mitt/brush. If you are using the recommended 2 bucket method, frequently rinse your wash mitt in the second bucket of water.
4. Once your vehicle has been fully lathered, wash off with a pressure washer or hose then dry.

The post TRACTOR SHAMPOO appeared first on Molecular UK.

Directions for use:

1. Pre-dilute with water depending on soiling.
2. Adjust the detergent control on your pressure cleaning system as required. (typically 1% – 5%).
3. Rinse thoroughly using high pressure water.

Dilution Guide:

• Heavy Soiling: Dilute 1:1 parts water
• Medium Soiling: Dilute 1:4 parts water
• Light Soiling: Dilute up to 1:20 parts water.

Molecular Tip: Pre-soaking will improve economy.

The post CHASSIS CLEANER EXTREME appeared first on Molecular UK.

For the best results it is recommended for use in high pressure cleaning systems, but it can be diluted into a low pressure spray if necessary.

Directions For Use:

Set the detergent control to give a 1% – 5% solution or as required.
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water.

The post TRACTOR WASH & WAX appeared first on Molecular UK.

Cleans vehicle exterior with ease. Breaks down traffic film, grime, dirt and grease. This product was formulated as a non-contact cleaner, reducing the chances of scratches and swirls.

Directions For Use:

Adjust your machine’s detergent control and air flow to the required rate, or dilute no more than 1:10 parts water in your foaming lance bottle.
Apply the solution evenly, covering your vehicle from top to bottom. Allow up to 5 minutes contact time.
Wash the solution off with clean high pressure water.

The post TRACTOR FOAM appeared first on Molecular UK.

Tractor Wash is to be used in conjunction with high pressure cleaning systems. Can be diluted into a low pressure spray if needed.

Directions For Use:

Set the detergent control to give a 1% – 5% solution or as required.
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water.

The post TRACTOR WASH appeared first on Molecular UK.

Tractor Sanitiser is the perfect cleaner for abattoirs, food factories, food carrying vehicles and other areas where it is vital for a high standard of hygiene. Used for cleaning plant, equipment, utensils, floors, walls and other hard surfaces.

Directions For Use:

1. Set the detergent control to give a 1% – 5% solution at the nozzle as required.
2. Apply the solution to the area being cleaned and allow up to 5 minutes contact time for activation.
3. After suitable contact time, rinse thoroughly with clean high pressure water.

The post TRACTOR SANITISER appeared first on Molecular UK.

Safely removes dirt, oil, grease and grime with ease. A biodegradable product that is safe to use on ferrous and non-ferrous metals, plastics, rubber and glass.

Dilute as required; typically between 1:50 – 1:100 parts water.

Key benefits from our Ultrasonic Cleaner Fluid:

– Water soluble

– Non-flammable

– Non-toxic

– Biodegradable

– Highly Concentrated

– Removes dirt, grime, grease and oil

Always test sample diluted solution prior to full application.

.

If you would like products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post ULTRASONIC CLEANING FLUID appeared first on Molecular UK.