Use on exterior tyres, rubber and plastics or on interior plastics and rubber when diluted.

DIRECTIONS FOR USE:

EXTERIOR USE (Apply neat for sheen finish / or dilute 1:1 for a satin finish):

1. Apply preferred solution to the area via trigger spray, cloth or brush.
2. Spread PLUTO evenly across the surface until whole area is covered.
3. Leave to dry or gently buff with a clean microfibre cloth.
4. Wipe away any excess spillages (on wheels, paint etc.) with a clean microfibre cloth.

INTERIOR USE (Dilute 1:2 for sheen finish / or 1:4 for a satin finish):

1. Apply preferred solution to the area via trigger spray, cloth or brush.
2. Spread evenly across the surface.
3. Leave to dry or gently buff with a clean microfibre cloth.
4. Wipe away any excess spillages (on wheels, paint etc.) with a clean microfibre cloth.

The post PLUTO appeared first on Molecular UK.

One application can last for up to 600 miles, making it extremely durable and cost effective.

Directions For Use:

1. Apply evenly once dry for a satin/matte finish.
2. Reapply once dry for a gloss finish.
3. The more layers applied, the greater the shine!

For a more “wet” look finish, check out CARBON BLACK

Molecular Tip: HALO Tyre Gel can also be used on plastic bumpers and trim.

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post HALO appeared first on Molecular UK.

Exterior Use

Apply neat to the surface.

Interior Use:

Dilute 1:1 for a slight gloss finish or 1:2 for a matte finish.

DIRECTIONS FOR USE:

1. Ensure the area you would like to apply AXIS silicone free dressing to is clean and dry.
2. Apply a liberal amount onto the area.
3. Wipe with a clean microfibre cloth.
4. If using on tyres, apply extra layers for a better shine.

Molecular Tip: Leave Axis to dry on the surface for a sheen finish (re-apply for extra shine), or wipe dry for a satin finish.

If you would like products for your own brand, check out our white label company: Powerclean Chemicals Ltd.

The post AXIS appeared first on Molecular UK.

Make sure when using Evolution Wheel Cleaner that you are wearing gloves and goggles for protection. For best results, make sure you wash off as much dirt and grime as you can with a pressure washer or hose prior to application. Do not use in direct sunlight.

DIRECTIONS FOR USE:

1. Ensure the wheels are cool to the touch.
2. Wash off any excess dirt and grime with a pressure washer or hose.
3. Spray a liberal amount of Evolution to the wheels and agitate with a wheel cleaning brush.
4. Wash off with a pressure washer or hose then dry.

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post EVOLUTION appeared first on Molecular UK.

Dilution Rates:

• Heavy Soiling: 1 part Gyrate to no less than 3 parts water
• Light Soiling / Normal Use: 1 part Gyrate to up to 15 parts water (typically 1:9)

DIRECTIONS FOR USE:

1. Ensure the wheels are cool and not warm to the touch.
2. Wash off any excess dirt and grime with a pressure washer or hose.
3. Spray a liberal amount of your diluted solution to the wheels and agitate with a wheel cleaning brush.
4. Wash off with a pressure washer or hose then dry.

If you would like these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post GYRATE appeared first on Molecular UK.

This product will not only improve the outer tyres durability, but finish your vehicle off with a showroom finish. You do not need to apply a lot of the product to see results straight away, meaning a little goes an awful long way. This product can also be used to rejuvenate the appearance of exterior plastics and vinyl as well as rubber. Suitable for car detailing, commercial car washing, trucks and buses.

DIRECTIONS FOR USE:

1. Make sure the vehicle tyre is clean and bone dry.
2. Apply a small amount of Carbon Black to your tyre applicator and apply to the tyre evenly.
3. Wipe away any excess product that may have dropped onto your wheel.

If you are looking for a silicone free tyre dressing, check out AXIS.

If you would like these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post CARBON BLACK appeared first on Molecular UK.

Once Nebula-X has been sprayed onto the surface, you will see the product break down the containments, creating a purple coloured trail often referred to as “bleeding” by detailers. You may only see a small amount of “bleeding” depending on the amount of contaminants on the surface. You should use Nebula-X  between every 4-6 months or so if your vehicle is regularly driven. Use at the decontamination stage of vehicle washing, prior to protection application. Suitable for professional valeting, personal usage, and commercial and agricultural vehicle cleaning.

DIRECTIONS FOR USE:

1. Apply a liberal amount onto the required surface.
2. Wait for the product to turn purple, allow up to 5 minutes contact time. Agitate wheels if necessary.
3. Rinse off with pressure washer or hose.

For a standard or non bleeding wheel cleaner, check out our other products in the Wheels & Tyres category.

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post NEBULA-X appeared first on Molecular UK.